This week…sailing to La Gomera

Monday-October 31, 2016-La Palma and La Gomera, Canary Islands

Early in the week it rained as a weakening low pressure system slowly made its way over the area.  We used the time to organize the Nav Station and get caught up on some cleaning.  When we had breaks in the rain we walked around town.  Santa Cruz de La Palma looks very different depending on the time of day and day of the week.  During siesta it is quiet with hardly anyone about.  On mornings a cruise ship is in port, the town almost feels like a tidy theme park.  During the evenings most tourists are gone, and the cafes buzz with conversant locals and musicians.  All of Santa Cruz’s aspects are pleasant and I do like the town.

Despite the attractiveness of La Palma, we felt quite ready to leave.  We wanted to go somewhere we could anchor out and enjoy some quiet.  Valle Gran Rey in La Gomera is that place.  Friday, the lingering low had dissipated and the Southerly wind shifted slightly to the Southwest, just enough to give us a favorable tack.  We left before the predicted calms settled the area Saturday.

We departed La Palma and had an exciting few hours close hauled in a Canary Island wind acceleration zone.  These are areas where the gradient wind can be greatly increased do to the Islands’ topography.  Many times these zones flank an island’s wind shadow making an obvious border between an area of calm and a zone of near gale force conditions.

A few hours out of La Palma we had transited the acceleration zone and were making good course in diminishing South Westerlies.  It was an awesome starry night of sailing with La Palma dead astern, Tenerife fine on our Port bow, El Hierro broad to starboard, and La Gomera dead ahead.  Though the sky was apparently clear of any clouds, heat lightning awed us throughout the night, first above Tenerife then La Gomera.

Saturday morning Dawn Treader was ghosting in light air and La Gomera stood 5 miles ahead.  Through the morning our speed steadily dropped. 4 knots, then 3, then 2, 1, and finally we were becalmed, drifting half a knot in the South setting Canary Islands current.  We tried to be patient with the wind, but after a few hours we decided to use our outboard engine to motor up to what appeared to be a patch of wind around La Gomera’s western promontory. I am still impressed with how well the 6hp engine pushes us along.  At half throttle we made 5 knots.  The patch of wind was the slightest of air and from astern, so not good for sailing.  We continued to motor for an hour, and then the wind eventually filled in from the port quarter.  We secured the engine and sailed the remaining 5 miles to Valle Gran Rey, first at 3 knots then 4, then 5.

The anchorage is wide open, and the conditions were about perfect for anchoring under sail. We approached on a port tack beam reach under reduced sail.  When we reached the spot just downwind of where we wanted to anchor, we rounded up to stop the boat, and furled the headsail.  I walked forward and took a sounding with the lead line while Debbie doused the Main.  I sounded 25 feet of water, then let go the anchor and paid out 110 feet of chain.  This all happened during the course of one exciting minute.

Now we are settled into La Gomera.  We love it here and look forward exploring this beautiful island.

Video: Nesting Dinghy, 9 Minute Assembly

After adding our new Lewmar hatches, our dinghy is even more useful. It covers a Lewmar Ocean 30 that we almost always kept open on our recent Atlantic crossing. We created a video to show how junior can go from stowed to assembled in under 9 minutes. Continue reading Video: Nesting Dinghy, 9 Minute Assembly

Video: Nesting Dinghy, Quick Disassembly

For 2 years we labored unnecessarily, assembling our dinghy on deck, lifting it in and out of the water with the boom as a crane, and clearing deck space to take apart. One day, while towing Junior in the Caribbean, we had to hastily put him on deck ahead of a squall. We dropped sail, laid a hull, and I hopped into the dinghy to take it apart for the first time in the water. Less than 5 minutes later, Junior was on deck. I was amazed and thrilled by how easy it was, while at the same time I felt foolish over years of wasted efforts.

Now we don’t hesitate to stow our dinghy on deck, even for easy day sails.

For  pictures of building and maintaining Junior check out Nesting Dinghy – Junior.

 

 

Watertight Companionway

Traditional sliding companionway designs seem to be the standard, few other options are available. However, we were not satisfied with Dawn Treader’s original design. While researching watertight designs and oceangoing rowboats, we found interesting hatch options that looked to be compatible. We chose the Lewmar Ocean 70 hatch for its large entryway, strength, and watertightness.

A few things changed simultaneously with the new companionway; look for new posts coming soon! Our cockpit footwell volume was reduced. Cabin ventilation was enhanced with the addition of a Lewmar Ocean 30 below the nesting dinghy. Inside the cabin, we now have more space! Our galley area has more elbow room, the new navigation station is in progress, and the cabin design is more open. The cabin sole also has 2 more usable feet of space (we are installing new sole as a result of the water tank project), and now there is ample room for a yoga mat!

We are happy with the companionway redesign! Exit and entry are easier than before, and we are excited to test our watertight hatch at sea! With this big project done, we are one large step closer to sailing.

Nesting Dinghy – Junior

Junior was born in 2013. He was built in Beaufort, North Carolina according to plans by Graham Byrnes.

After 2 years of sailing, Junior was ready for some TLC. His makeover was our first project upon return to the states in spring of 2015.

 

Check out this short video of Brian taking Junior apart in the water: Video: Nesting Dinghy, Quick Disassembly.